HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

By default, the P9000 Performance Advisor installer displays HP Storage Admins and HP Storage
Users as the domain groups. You can retain these names or provide group names of your choice (the
groups with the names that you provide must exist on the domain controller).
NOTE:
Ensure that the domain or site administrator has created the two default domain groups,
HP Storage Admins and HP Storage Users or the domain groups of your choice on the domain
controller.
Click Next to proceed. The Choose Setup Type installation window appears. For more information
on the next set of steps, see “Selecting complete or custom installation method” on page 56.
LDAP Authentication
In this authentication method, you must configure the following settings to implement LDAP
authentication. P9000 Performance Advisor uses these settings to connect to the LDAP server, and to
authorize and authenticate its users:
• LDAP server and connection settings. For more information, see “Configuring the LDAP server and
connection settings” on page 51.
• LDAP server user search and filter, and group settings. For more information, see “Configuring
the LDAP user search and filter, and group settings” on page 52.
The Authentication Configuration window appears for LDAP, where you must provide the server and
connection settings followed by the subsequent installation window for LDAP, where you provide the
filter and group settings.
Configuring the LDAP server and connection settings
To configure the LDAP server and connection settings:
Installing P9000 Performance Advisor50