HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

1. Enter the required Server and Connection values. “Configuring the LDAP server and connection
settings” on page 51 provides the description for each of the fields under the Server and
Connection sections.
Figure 8 Configure LDAP Server and Authentication Settings installation window
.
Table 4 LDAP server connection settings
DescriptionScreen elements
Network name (or IP address) and Port # of the LDAP server to be used for
authentication.
The default port # is 636 for LDAP when SSL is enabled. The default port #
is 389 for LDAP when SSL is not enabled.
Server Address box and
Port box
You can also specify a port # of your choice. In case, there is already an
LDAP server configured on another port, P9000 Performance Advisor uses
this LDAP server for authentication and authorization purposes.
The type of the LDAP server implementation:
Server Type list
• OpenLDAP
HP StorageWorks P9000 Performance Advisor Software Installation Guide 51