HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

• HP StorageWorks P9000 Performance Advisor Database
• HP StorageWorks P9000 Performance Advisor Database Listener
• HP StorageWorks P9000 Performance Advisor Security
• HP StorageWorks P9000 Performance Advisor Tomcat
• HP StorageWorks P9000 Performance Advisor Monitor
To confirm whether the above-mentioned services have started, see “Confirming the P9000 Performance
Advisor services” on page 62.
IMPORTANT:
The HP StorageWorks P9000 Performance Advisor Monitor service periodically monitors the P9000
Performance Advisor tomcat and database services, and dispatches appropriate email notifications
that provide the status of these services. To receive notifications, configure the SMTP notification
settings in the PAMonitor_mail.properties file available in the <Install_Drive>:\HPSS\
paMonitor\conf folder on your management station. For more information, see the HP
StorageWorks P9000 Performance Advisor Software User Guide .
If you want to view the P9000 Performance Advisor installation log, select the Show the Windows
Installer Log check box. The PA_Install.log file is also available in the user's Temp folder. Enter
%Temp% environment variable at the command prompt to navigate to the Temp folder.
IMPORTANT:
For the PA_Install.log to open, Windows Installer v4.0 or later should be installed on the
management station, and functioning properly.
To verify that you can access P9000 Performance Advisor, select the Launch HP StorageWorks P9000
Performance Advisor Management Station v5.2 check box. An IE browser window opens to launch
P9000 Performance Advisor from the management station. For more information, see “Launching
P9000 Performance Advisor” on page 64.
Review the procedures mentioned under “Configuring P9000 Performance Advisor related
settings” on page 62 before logging in to P9000 Performance Advisor. If any of those procedures
are applicable for your current setup, complete them for accessing P9000 Performance Advisor.
After accessing the P9000 Performance Advisor, do one of the following based on whether you have
performed an installation or upgrade:
• Return to the installation checklist to complete the remaining prerequisites and checklist items for
installing the host agents. For more information, see “Installation checklist for installing P9000
Performance Advisor” on page 15.
• Return to the upgrade checklist to complete the remaining prerequisites and checklist items for
upgrading the host agents. For more information, see “Upgrade checklist for upgrading P9000
Performance Advisor” on page 99.
NOTE:
For more information on the CLUI, P9000Watch, and P9000Sketch, see the respective documents.
For document download location, see “Related documentation” on page 152.
HP StorageWorks P9000 Performance Advisor Software Installation Guide 61