HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

1. Log on to P9000 Performance Advisor as a default administrator
(administrator:administrator). For more information, see “Launching P9000 Performance
Advisor” on page 64.
2. In the P9000 Performance Advisor Home screen, click Settings in the left pane.
3. From the list that appears, select Security.
4. In the Security screen, click New.
5. Enter the following details for the user in the pop-up window that appears:
a. Name of the new user and a brief description about the user profile.
b. A password for the user account.
c. Enter the password again in the Confirm Password box.
d. Assign the user to a group.
The Group list displays Administrators, StorageAdmins (read and write access), and Users
(read access). These are the only groups available for P9000 Performance Advisor Native
Authentication.
6. Click OK.
A new user record appears on the Security screen, under the Users tab. In addition, the group to
which the user belongs is also shown in the Group Membership column. For more information on
creating and editing users in P9000 Performance Advisor, see HP StorageWorks P9000 Performance
Advisor Software User Guide. For document download location, see “Related
documentation” on page 152.
Adding users for Windows System Authentication
Add local users, domain users or group to the HP Storage Admin or the HP Storage Users group, if
Windows System Authentication is implemented on your management station. To add users:
1. On your management station, go to Start > Control Panel > Administrative Tools > Computer
Management > System Tools > Local Users and Groups > Groups.
The HP Storage Admin and HP Storage Users groups are located in the Groups folder on your
management station.
2. Right-click the HP Storage Admin or the HP Storage Users group, based on whether you want to
add admin users or only users.
3. Select the Add to Group option from the pop-up list to add local users, domain users, or a group.
Only users from these groups are provided the administrator and user privileges, and are authorized
to log on to P9000 Performance Advisor.
NOTE:
You cannot add other local groups that reside on your management station to the HP Storage Admin
or the HP Storage Users groups.
After the above-mentioned settings are configured, launch P9000 Performance Advisor. For more
information, see “Launching P9000 Performance Advisor” on page 64.
HP StorageWorks P9000 Performance Advisor Software Installation Guide 63