HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

If you want to install the P9000 Performance Advisor UNIX host agents, see “Installing the P9000
Performance Advisor UNIX host agents” on page 79.
Confirming the P9000 Performance Advisor Windows host agent services
To confirm whether the P9000 Performance Advisor Windows host agent services have started:
1. Select Start > Run, type services.msc, and press the Enter key.
The Services dialog box appears.
2. If the P9000 Performance Advisor Windows host agent has been installed, the status of the
following services are in the Started mode:
• HP StorageWorks P9000 Performance Advisor Hostagent
• HP StorageWorks P9000 Performance Advisor Realtime Server
Figure 14 Services dialog box - Confirming Windows host agent major services
.
The HP P9000 Performance Advisor Realtime Server appears, only if you have
selected the real-time component while installing the host agent.
If the Windows host agent service has not started automatically, manually start the host agent service.
For more information, see Appendix B.
Installing the P9000 Performance Advisor UNIX host agents
NOTE:
This section is also applicable for the upgrade process.
This section describes installing the P9000 Performance Advisor UNIX host agents. The installation
process is described in the following topics:
• “Executing the UNIX host agent installer” on page 79
• “Enabling the UNIX host agent to use IPv6” on page 80
• “Completing the UNIX host agent installation and next steps” on page 80
Executing the UNIX host agent installer
IMPORTANT:
Before proceeding with the installation, use P9000Info to verify that the connectivity to the command
device is established. If you are performing an upgrade, the connectivity to the command device must
already exist. For more information, see “Verifying host agent connectivity to a command
device” on page 41.
To execute the UNIX host agent installer:
1. Telnet to the remote host as a root user.
HP StorageWorks P9000 Performance Advisor Software Installation Guide 79