HP StorageWorks P9000 Performance Advisor Software v5.2 Install Guide (T1789-96317, May 2011)

6. In the respective component type lists, select the check boxes for the components to collect their

performance data. The following component type lists are displayed:

For an XP disk array, the DKC provides data on the

CHIPs, ACPs, Cache, SLPR, CLPR, and the SM.

DKC

For a P9000 disk array, the DKC provides data on

the MP blades, in addition to the data on the Cache,

CLPR, and the SM.

NOTE:

SLPR does not exist in the P9000 disk arrays.

So, the SLPR-related data is not displayed for

the P9000 disk arrays.

Displays the frontend ports.Port(s)

Displays the XP or the P9000 disk array volumes,

including business copy and continuous access

(synchronous/asynchronous) volumes.

RG(s)

Displays the ThP volumes.THP Group(s)

Displays the snapshot volumes.SNAP Group(s)

Displays the continuous access journal volumes.CA Journal Group(s)

Displays the external RAID groups connected to the

selected XP or the P9000 disk array.

External RG(s)

NOTE:

• Selecting a ThP, snapshot, or a continuous access journal volume also provides the re-

spective volume pool information.

• The THP Group(s), CA Journal Group(s), and the SNAP Group(s) component type lists

are displayed only if the corresponding components are configured on the selected XP

or the P9000 disk array. The External RG(s) component type list is displayed only if the

external volumes are attached to the selected XP or the P9000 disk array.

• If you want all the corresponding components to be selected, choose the Select All check

box in a particular component type list box. The Select All check box is provided for

each component type list.

Figure 18 on page 97 shows scheduling performance data collection for 53036, which belongs

to the P9500 Disk Array type.

Using P9000 Performance Advisor96