HP StorageWorks P9000 Performance Advisor Software v5.3 Install Guide (T1789-96323, August 2011)

v4.5.1, or v4.6 respectively. For document download location, see “Related documenta-
tion” on page 152.
2. Upgrade from a v4.5, v4.5.1, or v4.6 to v5.0, v5.1, v5.2, or v5.2.1. Complete a set of pre-
requisites and proceed with the upgrade process. For more information, see the HP StorageWorks
P9000 Performance Advisor Software Installation Guide provided for the v5.0, v5.1, v5.2, or
v5.2.1 respectively. For document download location, see “Related documentation” on page 152.
3. Upgrade from a v5.0, v5.1, v5.2, or v5.2.1 to v5.3. Complete the prerequisite on adequate
free disk space and proceed with the upgrade process. For more information, see “Using v5.0,
v5.1, v5.2, or v5.2.1 of P9000 Performance Advisor” on page 104.
Using v5.0, v5.1, v5.2, or v5.2.1 of P9000 Performance Advisor
For the upgrade from v5.0, v5.1, v5.2, or v5.2.1 to v5.3 to complete successfully, ensure that adequate
free disk space (at least double the size of the existing database) is available on the
<Installation_Drive>, where you intend to upgrade to P9000 Performance Advisor v5.3. For
example, if P9000 Performance Advisor is installed on the C:\ drive, ensure that adequate free disk
space is available on C:\ before proceeding with the upgrade.
After the above-mentioned prerequisite is completed, upgrade to the latest version of P9000
Performance Advisor and verify that the upgrade is successful. For more information, see Chapter
7 on page 105.
Disabling UAC on a Windows management station
IMPORTANT:
Applicable only if you are upgrading P9000 Performance Advisor on a Windows management
station, where UAC is enabled.
For more information, see “Disabling UAC on a Windows management station” on page 32.
Understanding the P9000 Performance Advisor upgrade prerequisites104