HP StorageWorks P9000 Performance Advisor Software v5.3 Install Guide (T1789-96323, August 2011)

Solution or WorkaroundError DescriptionError Title
Upgrade the physical memory on your
management station to 1 GB RAM or
higher. The installation wizard will exit
now. After you upgrade the physical
memory, double click PA_Server.exe
to resume the installation of P9000
Performance Advisor.
The installation wizard has detected that
sufficient physical memory is not available
on this management station. There must be
at least 1 GB of physical memory available
for the installation wizard to proceed.
Insufficient physical
memory on this
management
station.
Create at least 1 GB of free disk space in
your management station’s
<Install_drive>\TEMP folder
(required only if you are selecting a
Complete installation for P9000
Performance Advisor).
The installation wizard has detected that
sufficient free disk space is not available
in the <Install_drive>\TEMP on this
management station.
Insufficient free disk
space in the
<Install_drive>\
TEMP folder on this
management
station.
Create the domain administrator group on
your management station if you want to
implement Domain authentication method.
For more information on Domain
authentication method, refer to the P9000
Performance Advisor install guide available
on Disk 1. The installation wizard will exit
now. After you create the groups, double
click PA_Server.exe to resume the
installation of P9000 Performance Advisor.
The installation wizard has detected that
the administrator group does not exist on
your management station. This group must
be created for the installation wizard to
proceed.
The entered admin
group does not exist
in the domain
provided.
Create the domain user group on your
management station if you want to
implement Domain authentication method.
For more information on Domain
authentication method, refer to the P9000
Performance Advisor install guide available
on Disk 1. The installation wizard will exit
now. After you create the groups, double
click PA_Server.exe to resume the
installation of P9000 Performance Advisor.
The installation wizard has detected that
the user group does not exist on your
management station. This group must be
created for the installation wizard to
proceed.
The entered user
group does not exist
in the domain
provided.
Upgrade the existing version of P9000
Performance Advisor and the host agents
to v4.5, or a later version. For more
information, refer to the P9000
Performance Advisor install guide available
on Disk1. The installation wizard will exit
now. After you upgrade to v4.5, or a later
version, double click PA_Server.exe to
resume the upgrade process.
The installation wizard has detected that
an earlier version (pre-4.5) of P9000
Performance Advisor is installed on the
management station. For the installation to
proceed, the current installed version
should be v4.5 or later.
Earlier version
(pre-3.5) of P9000
Performance
Advisor already
exists on this
management
station.
Disable UAC on your management station,
if it is a Windows Vista system. For steps
on how to disable UAC on your
management station, refer to the P9000
Performance Advisor install guide available
on Disk1. The installation wizard will exit
now. After disabling UAC, double click
PA_Server.exe to resume the installation
of P9000 Performance Advisor.
The installation wizard has detected that
UAC is enabled on your management
station. UAC should be disabled for the
installation to proceed.
User Access Control
(UAC) is enabled on
this management
station
Troubleshooting P9000 Performance Advisor installation related issues148