Manualshelf

HP StorageWorks P9000 Performance Advisor Software v5.3 Install Guide (T1789-96323, August 2011)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Performance Advisor XP Media Kit
31323334353637383940
4. Reboot the system.
You can enable UAC after installing P9000 Performance Advisor. For a Windows Vista management
station, you can repeat the previous steps and select Enable UAC to activate UAC before you reboot
the management station.
Configuring the web browser proxy server settings
IMPORTANT:
Perform this procedure after you complete installing P9000 Performance Advisor.
Configure your IE browser to not use a proxy server for the IP address or fully qualified domain names.
To configure the IE browser proxy server settings:
1. In a IE browser window, click Tools > Internet Options > Connections > LAN Settings.
2. In the Local Area Network (LAN) Settings window, select the Use a proxy server for your LAN
(These settings will not apply to dial-up or VPN connections) check box.
3. Click Advanced.
4. In the Exceptions text box, place your cursor at the end of the domain list.
5. Enter a semicolon and your IP address, and the fully-qualified domain name of the management
station.
6. Click OK to save changes.
P9000 Performance Advisor host agent prerequisites
This section describes the following host agent prerequisites that you must complete before installing
the P9000 Performance Advisor host agents:
• “Verifying the supported configurations for P9000 Performance Advisor host agents” on page 33
• “Configuring settings on Windows and UNIX hosts” on page 34
• “Creating and presenting command devices to hosts” on page 36
• “Mapping command devices” on page 39
• “Verifying host agent connectivity to a command device” on page 41
• “Configuring SSL settings for the P9000 Performance Advisor host agents” on page 84
For more information on installing P9000 Performance Advisor host agents, see “Installing P9000
Performance Advisor host agents” on page 71.
Verifying the supported configurations for P9000 Performance Advisor host
agents
To install the P9000 Performance Advisor host agents, verify that you have the supported configurations
in the following categories:
• Hardware on page 33
• Software on page 34
Hardware
Your Windows or UNIX hosts must include the following respective hardware requirements:
HP StorageWorks P9000 Performance Advisor Software Installation Guide 33