HP StorageWorks P9000 Performance Advisor Software v5.3 Install Guide (T1789-96323, August 2011)

7. Edit /etc/vsftpd.ftpusers to comment out the line:

# root

8. Edit /etc/vsftpd.user_list to comment out the line:

# root

9. Restart the service by entering /sbin/service xinetd restart.

10. Restart vsftpd by entering /sbin/service vsftpd restart. Make sure no other ftp

services are running (for example, tftp).

Creating and presenting command devices to hosts

If you are using RAID Manager (Business Copy and Continuous Access Synchronous), you already

have command devices that the P9000 Performance Advisor host agent can use. If RAID Manager

is not being used, create a command device using the Remote Web Console or the Remote Control

applications. If you are using the Command View Advanced Edition Device Manager, you must launch

the Command View AE Device Manager and then the Remote Web Console.

• Creating a command device for the XP24000/XP20000/XP12000/XP10000 Disk Ar-

ray on page 37.

• Creating a command device for the XP1024/XP128 Disk Array on page 37.

• Creating a command device for a P9000 disk array on page 38.

NOTE:

• For the XP24000/XP20000/XP12000/XP10000 Disk Array, configure the command devices as

SLPR0 to report the full SLPR data.

• For the XP24000 Disk Array and the P9000 disk arrays, you can also configure the ThP VVols

as command devices.

• The P9000 Performance Advisor Windows and UNIX host agents can coexist with the RAID

Manager.

For further assistance, contact HP Technical Support.

Logging into XP Remote Web Console through XP Command View AE

Complete the following steps to log onto the XP Remote Web Console:

1. Open an IE browser window and enter http://<ip_address>:23015/DeviceManager/

address in the browser address line to access the XP Command View AE Device Manager.

NOTE:

If you are using a secured connection, the port number is different and the URL format is as

follows:

http://<ip_address>:23016/DeviceManager/

2. In the Login window, enter the user name as system and the password as manager, and click

3. In the Command View XP AE Device Manager window, click the Resources tab in the CV AE

Device Manager Explorer navigation pane.

Understanding the P9000 Performance Advisor installation prerequisites36