HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

• “Setting threshold and dispatch levels” on page 149
• “Configuring alarm notifications” on page 150
• “Establishing scripts for alarms” on page 153
• “Applying a template” on page 155
• “Deleting records in the Alarms table” on page 156
• “Filtering records in Alarms History table” on page 162
• “Viewing graph of metric value's performance” on page 165
• “Filtering event records” on page 167
Applying a template
You can manually configure the threshold and dispatch settings, and alarm notification settings, or
use the details from an already configured component record as a template and apply the same
settings across multiple other selected records.
IMPORTANT:
You cannot enable or disable alarms on the selected component records using this option. For more
information on enabling or disabling alarm notifications, see “Enabling or disabling
alarms” on page 154.
To apply settings across multiple records:
1. Click Alarms in the left pane.
2. Under the Alarm Configuration tab, select the component record whose settings should be applied
across multiple records. (It is not mandatory that you click the check box for a component record
to select it).
You can also filter component records in the Alarms table. For more information, see “Filtering
records in Alarms table” on page 147.
3. Click Copy to Template.
The record details are populated as applicable in the following text boxes, in the Apply Template
section:
The following images show the apply template steps for 10055, which is a XP12000 Disk Array
type.
4. Select the records for which the copied settings should be applied. (It is not mandatory that you
click the check box for a component record to select it).
HP StorageWorks P9000 Performance Advisor Software User Guide 155