HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)
10 Viewing XP and P9000 disk array
components
This chapter discusses the following topics:
• “Introduction” on page 201
• “Viewing performance summary” on page 206
• “Viewing XP and P9000 disk array summary” on page 211
• “Volume Information” on page 212
• “Advisory on CLPR utilization” on page 215
• “Viewing CHIP/CHA data” on page 215
• “Viewing ACP/DKA data” on page 220
• “Viewing MP blade utilization for P9000 disk arrays” on page 224
• “Viewing data on Smart and ThP pools for P9000 disk arrays” on page 227
• “Utilization Summary” on page 213
• “10 busiest LDEVs/Ports” on page 231
• “10 busiest LDEVs/RAID groups” on page 232
• “RAID Group summary” on page 233
• “Port summary” on page 235
• “Viewing LDEV data” on page 238
Introduction
P9000 Performance Advisor provides the overall configuration, performance, and utilization summary
of the XP and the P9000 disk arrays on the Array View screen (see Figure 12 on page 203). The data
is displayed from the last performance data collection time stamp and includes the following:
• The configuration and component distribution summary.
• The performance summary, which includes the average performance of the frontend and the
backend components, Cache, and CLPR for an XP disk array.
In addition to the above-mentioned, the average utilization of each MP blade is also displayed
for a P9000 disk array.
• The utilization summary, which includes the total utilization of the Cache, Bus (cache memory and
shared memory), ACP, and the CHIP for an XP disk array.
The utilization summary for a P9000 array includes the total utilization of the Cache, Bus (cache
memory and shared memory), and the MP blade.
From the high level summary, you can further drill down to view the performance data of the individual
CHIPs or CHAs, ACPs or DKAs, MP blades, LDEVs, RAID groups, ports, ThP and smart pools.
HP StorageWorks P9000 Performance Advisor Software User Guide 201