HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)
• “Viewing MP blade utilization for P9000 disk arrays” on page 224
• “Viewing data on Smart and ThP pools for P9000 disk arrays” on page 227
• “Utilization Summary” on page 213
• “10 busiest LDEVs/Ports” on page 231
• “10 busiest LDEVs/RAID groups” on page 232
• “Port summary” on page 235
• “Viewing LDEV data” on page 238
Viewing ACP/DKA data
Based on whether you selected an XP or a P9000 disk array, click an ACP/DKA pair in the ACP Pair
Backend group box under the Performance View tab to view the summary of all the installed ACP/DKA
pairs. You can also click ACP for an XP disk array or CHA/DKA for a P9000 disk array in the
component selection tree.
The summary is displayed in the ACP/DKA summary table for the XP disk arrays and the DKA summary
table for the P9000 disk arrays (see following images).
• The ACP/DKA summary table includes the performance and utilization metrics of all the installed
ACP/DKA pairs
• The DKA summary table includes only the performance metrics of all the installed DKAs
Further, you can also click an individual ACP/DKA pair in one of the above-mentioned tables to view
its metrics. For more information, see Viewing summary of an individual CHIP/CHA on page 222.
The following images display the ACP Pair Backend group box and the ACP/DKA summary table for
10090, which belongs to the XP24000 Disk Array type:
Viewing XP and P9000 disk array components220