HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

IMPORTANT:
When you request a port summary report, the total I/Os displayed may not be equal to the sum of
the I/Os across each of the ports. This can occur if multiple paths to an LDEV exist. The port IO
summary indicates the IO ceiling values across the ports. It does not indicate the absolute or accurate
I/O rates across the ports.
Click a CHP Port ID to view the associated performance graphs in the Chart Work Area. The port
type for the selected port ID is also displayed in the chart legends. For more information, see “Plotting
charts” on page 264.
Click Refresh when you want to view the updated port summary.
Figure 21 Port summary
.
DescriptionScreen elements
Displays the port ID for the CHP port. Provides the op-
tion to view information associated with a particular
port or with all ports.
CHP Port ID
Displays the SLPR with which the RAID group is associ-
ated.
NOTE:
SLPR does not exist in the P9000 disk arrays. So,
the SLPR-related data is displayed only for the XP
disk arrays.
SLPR
Displays the SLPR group ID.
NOTE:
SLPR does not exist in the P9000 disk arrays. So,
the SLPR group ID is displayed only for the XP disk
arrays.
SLPR Name
Viewing XP and P9000 disk array components236