HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

5. Click Add License.
CAUTION:
After the licenses are installed, do not modify the date and time on the management station
where P9000 Performance Advisor is installed. Modifying them may result in inaccurate
configuration and performance collections.
The following details are updated in the View License File Status section. These details are for
the specific XP or the P9000 disk array serial number for which the license is generated:
DescriptionScreen elements
Displays the type of XP or the P9000 disk array that P9000 Performance Advisor
monitors.
Hardware Platform
Displays the serial number of the XP or the P9000 disk array.Serial Number
Displays the internal raw disk capacity of an XP disk array or the usable capacity
of a P9000 disk array.
Array Capacity (TB)
Displays the aggregate capacity of all valid license keys installed. The License
Capacity (TB) is updated every day after 1:00 PM.
License Capacity
(TB)
• If 15TB Permanent license is installed for an XP or a P9000 disk array, the Li-
cense Capacity (TB) displays 15TB.
• If 15TB Permanent license and 100TB-Days of Meter based Term license are
installed for a P9000 disk array, the License Capacity (TB) displays15TB,
+100TB-Days.
Displays N/A after the TB-Days are installed. The Term (Days) is updated every
day after 1:00 PM to show the remaining number of installed TB-Days.
NOTE:
Term (Days)
• Applicable only for Meter based Term license.
• Displays 0, if the installed TB-Days are insufficient to monitor the addi-
tional usable capacity.
For an XP disk array record, the Term (Days) displays N/A, as only a Permanent
license is used to monitor the internal raw disk capacity.
The Term (Days) displays N/A for a P9000 disk array record, if the usable capacity
is monitored using only the Permanent license.
Displays Installed, which indicates that new configuration collection is possible.
License Status
If a Permanent license is installed for an XP or a P9000 disk array, the End Date
displays Never, which indicates that the license is for an unlimited duration.
If TB-Days are installed for a P9000 disk array, the date when the license ends
appears. The End Date is updated every day after 1:00 PM to show the date when
the installed TB-Days will be completely used.
End Date
Displays the appropriate messages for each XP or the P9000 disk array record.
The message includes the type of license installed, license duration, and expiry
date.
Comments
Managing licenses for XP and P9000 disk arrays38