HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

DescriptionScreen elements
Displays the DKC number and the user-friendly name of the XP or the P9000 disk array.Array (Array Name)
Displays the system name of the host.Host ID
Displays the port that is configured to communicate data between the command device
(on an XP or a P9000 disk array) and the associated host agent.
Port
Displays the ID of the LDEV that is configured as a command device.Cmddev
Displays the device file for the command device.DeviceFile
Displays —, if the configuration collection is not yet initiated for an XP or a P9000 disk
array. After the configuration data collection is initiated, the Last Collection displays
the date and time when P9000 Performance Advisor receives the complete configuration
data from the XP or the P9000 disk array.
Last Collection
Displays —, if configuration collection is not yet scheduled or a one-time configuration
data collection is performed on the XP or the P9000 disk array. The schedule type and
duration (date and time stamp) are displayed under Frequency, only if a configuration
data collection is scheduled.
Frequency
Displays the following icons based on the status of the configuration data collection
that you initiated. Hover the pointing device over the status icon to know the status,
which is displayed as a tool tip:
•
Displays , if configuration data collection (one-time or scheduled) is not yet initi-
ated.
•
Displays , if configuration data collection (one-time or scheduled) is complete
without any errors.
•
Displays , if configuration data collection (one-time or scheduled) has failed due
to an error. The reason for the error is displayed as a tool tip.
•
Displays , if configuration data collection (one-time or scheduled) is in progress.
Collection Status
Click Refresh to perform a manual refresh of the Configuration Collection table.
HP StorageWorks P9000 Performance Advisor Software User Guide 57