HP StorageWorks P9000 Performance Advisor Software v5.3 User and Troubleshooting Guide (T1789-96322, August 2011)

Initially, when performance data collection is not yet configured for the XP and the P9000 disk arrays,
the following details are displayed in the Performance Collection table, under the Performance
Collection tab:
DescriptionScreen elements
Displays the DKC number of the XP or the P9000 disk array.Array
Displays the system name of the host.Host ID
Displays the port that is configured to communicate data between the
command device on an XP or a P9000 disk array and the associated host.
Port
Displays the LDEV ID of the LDEV that is configured as a command device.Cmddev
Displays the device file for the command device.DeviceFile
No schedule name.Schedule Name
Displays 0,0,0Frequency (DKC, RG, Port)
Displays
Enabled
Displays the View link, clicking which displays empty schedule, as the
schedule is not yet created.
Components
Related Topics
• “Viewing a performance data collection schedule” on page 77
• “Editing frequency of performance data collection” on page 78
• “Starting performance data collection” on page 79
• “Deleting performance data collection schedule” on page 79
• “Restarting the performance data collection in case of a disk failure” on page 77
• “Starting real-time performance data collection” on page 85
HP StorageWorks P9000 Performance Advisor Software User Guide 69