HP StorageWorks P9000 Performance Advisor Software v5.4 User Guide (T1789-96328, April 2012)

<?xml version=”1.0” encoding="ISO-8859-1"?>

<Method>Run Script</Method>

<Full-Script-Path>C:\Temp\a.bat</Full-Script-Path>

</Service>

Related Topics

• “Adding or removing metric values” on page 138

• “Setting threshold level” on page 142

• “Configuring alarm notifications” on page 143

• “Enabling or disabling alarms” on page 146

• “Applying a template” on page 147

• “Deleting records in the Alarms table” on page 148

• “Filtering records in Alarms History table” on page 153

• “Viewing graph of metric value's performance” on page 155

• “Filtering event records” on page 158

Enabling or disabling alarms

By default, P9000 Performance Advisor monitors only those components for which alarms are enabled

and sends appropriate notifications to intended recipients when required. Though threshold and

dispatch settings are configured on components, they are not monitored until you enable alarms on

those components. You must manually activate or enable an alarm on a component for P9000

Performance Advisor to start monitoring the selected component and send notifications. To enable

alarms on components:

1. Click PA and DB Settings > Configure Alarms in the left pane.

2. In the Alarms table, select the component records for which you want to specify the threshold

level.

You can also filter component records in the Alarms table.

• To enable alarms on components, select Enabled from the list under the Enabled column. By

default, the current state for a newly added component record appears as Disabled in the

Alarms table.

Once the alarm record is enabled, it implies that the selected component will be monitored

by P9000 Performance Advisor.

• To disable alarms on components, select Disabled from the list under the Enabled column.

Once the alarm record is disabled, it implies that the selected component will not be monitored

by P9000 Performance Advisor.

3. Click Save to commit the changes.