HP StorageWorks P9000 Performance Advisor Software v5.4 User Guide (T1789-96328, April 2012)

In the above image, under Front-end for the XP disk array 10090 (XPArray_1):
1. Front-end is the main category.
2. Port is the component type. The number (40) indicates the number of ports for the XP disk array
10090.
3. CL1A is one of the individual ports.
4. CHP00–1EU is an individual MP associated with the port CL1A.
5. CHA–1EU is an individual CHA associated with the selected CHP00–1EU.
For the P9000 disk arrays
The Front-end main category comprises of the ports that further displays the associated CHAs. Following
is the component selection path:
Front-end > Port (component type) > Individual ports > Individual CHAs.
The port type, such as Fibre, Ficon, Escon, or FCoE is also displayed beside the port ID.
IMPORTANT:
Since, the CHIP/CHA MPs are moved to the MP blades in the P9000 disk arrays, their MP utilization
metrics are not applicable for the P9000 disk arrays. For more information, see “MP Blades navigation
path” on page 273.
In the above image, under Front-end for the P9000 disk array 53046:
1. Front-end is the main category.
2. Port is the component type. The number (32) indicates the number of ports for P9500 Disk Array
53046.
3. CL1A is one of the individual ports.
4. CHA–1EU is an individual CHA associated with the port CL1A.
Using charts270