HP StorageWorks P9000 Performance Advisor Software v5.4 User Guide (T1789-96328, April 2012)

2. Click the plust (+) sign for an XP or a P9000 disk array serial number to view the component
categories.
The following image shows the MP selection for MPB-1MA under the MP Blade(s) component
category for 53012, which belongs to the P9500 Disk Array type.
Additionally, the following are displayed:
• HostAgent list: Displays the host agent that is connected to the selected XP or P9000 disk array.
• Command device list: Displays the command devices for the selected XP or P9000 disk array.
These command devices communicate with the host agents displayed in the HostAgent list.
• Choose Metrics list: Displays the set of real-time metrics based on the category that you select.
3. Click the plus (+) sign for a component category to view the associated list.
NOTE:
• The LDEV component category displays the list of CUs and each CU provides the list of
LDEVs that belong to the CU.
• For a P9000 disk array, the MP Blade category displays the MP blades and each MP
blade displays the list of MPs. From the list displayed, you can plot chart for only one
MP at a time.
• For an XP disk array, the CHA(s) category displays the CHIP boards and each CHIP
board displays the list of MPs. Similary, the DKA(s) category displays the individual
DKAs and each DKA displays the list of MPs. From the list displayed for a CHIP board
or DKA, you can plot chart for only one MP at a time.
4. Select a set of five or lesser number of components. Use the Shft or the Ctrl key for sequential or
random selection of components.
Troubleshooting issues for components associated with applications352