HP StorageWorks P9000 Performance Advisor Software v5.4 User Guide (T1789-96328, April 2012)

DescriptionScreen elements
Displays the available license capacity.
• If you select an XP disk array record, this column
always displays the Installed License Capacity
value.
• If you select a P9000 disk array record whose
usable capacity is monitored using only a Per-
manent license, this column displays the Installed
License Capacity value.
• In case of Meter based Term licenses:
1. If you select a P9000 disk array record for
which both the Permanent license and TB-
Days of Meter based Term license are in-
stalled, and if the TB-Days are currently
active, this column displays the Permanent
licensed capacity and the remaining in-
stalled TB-Days.
2. If the installed TB-Days are completely used
and additional TB-Days are not available,
this column displays the Permanent licensed
capacity and 0TB-Days of Meter based
Term license.
3. If the installed TB-Days are dormant, this
column displays the Permanent licensed
capacity and the TB-Days that you installed.
If 50TB Permanent licensed capacity is
active and you installed 10TB-Days that are
dormant, the following are displayed:
• 50TB
• 10TB-Days
NOTE:
In any of the preceding three cases (1,2
and 3), if you remove the Meter based
Term license, only the Permanent license
capacity is displayed.
Licenses Available
Managing licenses for XP and P9000 disk arrays42