HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

Specifies the address of a management station in the format: <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specifies a user name and password pair in the format user name:password.–auth <user:passwd>
Can be used in place of -auth.
NOTE: The password file must be created using the encrypt script only.
–pf <password file>
Prints the usage statement.–?
Examples
cachegrp -dkc 10851 -clpr 0 -hr
cachegrp -dkc 10851 -perf -hr
cachegrp -dkc 10851 -hr
cachegrp -dkc 10851 -clpr 0 -L
DKCS
Syntax
dkcs [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -dkc
<serial #> [-?]
Supported disk array types
XP and P9000 disk arrays.
NOTE: The output for this command may be different for XP and P9000 disk arrays. For more
information, see “DKCS” (page 55).
Description
Displays the Client-Host Interface Processor (CHIP) and Array Control Processor (ACP) utilization
data for a given array.
Switches
Required. Specifies the array serial number.–dkc <serial #>
Specifies the delimiter for delimited output.–d<delim>
There is no space between -d and the delimiter character.
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format: <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specifies a user name and password pair in the format: username:password.–auth <user:passwd>
Prints the usage statement.–?
Examples
dkcs -hr -dkc 30143
dkcs -L -dkc 30143
dkcs -dkc 30143
DKCH
Syntax
18 CLUI commands