HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)
Specify the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.–auth <user:passwd>
Specify the version number. Indicates how the data must be displayed. Currently supported
values are 010500, 010600, and 015100. The default value is 010500.
–dver <xxxxxx>
Specify the maximum number of records to return. You cannot specify a number of records
higher than 16000.
–mr <maxRecords>
Specify the RAID Group for which you want the output displayed.–rg <raidGroup>
The word "all" can be used to indicate all hosts. Not adding this switch has the same
effect.
Specify the CHP port for which you want the output displayed.–chp <chpPort>
The word "all" can be used to indicate all hosts. Not adding this switch has the same
effect.
Specify the ACP pair for which you want the output displayed.–acp <acpPair>
The word "all" can be used to indicate all hosts. Not adding this switch has the same
effect.
Prints the usage statement.–?
Specify the User Group Name. Can be used interchangeably with –dkc or –ha.–ugrp <user group>
Examples
lund -hr -dkc 30143
lund -dkc 30143 –L
lund -dkc 30143
lund -hr -dkc 30143 -dver 010600
LDEV
Syntax
ldev [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -dkc
<serial #>
-ldev <logical device #> [-st <start time> -et <end time>][-dver
<xxxxxx>] [-?]
Supported disk array types
XP and P9000 disk arrays.
NOTE: The output of this command might be different for XP and P9000 disk arrays. For more
information, see “LDEV” (page 67).
Description
Displays logical device history data for a given duration. It lists information such as random reads,
random writes, sequential writes, sequential reads, random read hits, random write hits, sequential
read hits, and sequential write hits.
If no start time and end time is specified, this command returns the most recent 10 performance
data points of a LDEV from the management station.
22 CLUI commands