HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

XP and P9000 disk arrays
Description
Displays the alarm history data. Alarm history objects are created when the array usage exceeds
a certain user-defined threshold in one of the metric categories. This command does not display
the status of alarm.
Switches
Specify the address of a management station in the format
<http://path.to.managementstation/>.
–ms <URL>
Specify a user name and password pair in the format username:password.–auth <user:passwd>
Specify the array serial number.–dkc <serial #>
Specify the metric category. Valid values are as follows:
nl
–metric <Category>
IO_TOTAL - LDEV IO Total
nl
IO_RAND_TOTAL LDEV – IO Random Total
nl
IO_RAND_READ LDEV - IO Random Read
nl
IO_RAND_READ_CACHE LDEV – IO Random Read Cache Hits
nl
IO_RAND_WRITE LDEV – IO Random Write
nl
IO_RAND_WRITE_CACHE
nl
LDEV IO Random Write Cache Hits
nl
IO_SEQ_TOTAL LDEV IO Sequential Total
nl
IO_SEQ_READ LDEV IO Sequential Read
nl
IO_SEQ_READ_CACHE LDEV IO Sequential Read Cache Hits
nl
IO_SEQ_WRITE LDEV IO Sequential Write
nl
IO_SEQ_WRITE_CACHE LDEV
nl
IO Sequential Write Cache Hits
nl
MB_TOTAL LDEV MB Total
nl
MB_RAND_TOTAL LDEV MB Random Total
nl
MB_RAND_READ LDEV MB Random Read
nl
MB_RAND_WRITE LDEV MB Random Write
nl
MB_SEQ_TOTAL LDEV MB Sequential Total
nl
MB_SEQ_READ LDEV MB Sequential Read
nl
MB_SEQ_WRITE LDEV MB Sequential Write
nl
CFW_TOTAL LDEV IO type
nl
CFW_READ LDEV IO type
nl
CFW_READ_CACHE LDEV IO type
nl
CFW_WRITE LDEV IO type
nl
CFW_WRITE_CACHE LDEV IO type
nl
DFW_COUNT LDEV IO type
nl
DFW_NRML_COUNT LDEV IO type
nl
DFW_SEQ_ACCESS LDEV IO type
nl
DFW_WRITE_HITS LDEV IO type
nl
DFW_SA_WRITE_HITS LDEV IO type
nl
CACHEMODE_INHIBIT LDEV IO type
nl
CACHEMODE_BYPASS LDEV IO type
nl
PORT_IO_MAX Port Maximum IO/s
nl
PORT_IO_MIN Port Minimum IO/s
nl
PORT_IO_AVE Port Average IO/s
nl
PORT_MB_MAX Port Maximum MB/s
nl
PORT_MB_MIN Port Minimum MB/s
nl
PORT_MB_AVE Port Average MB/s
nl
FBUS_HI DKC Bus Utilization
nl
FBUS_LO DKC Bus Utilization
nl
MBUS_HI DKC Bus Utilization
nl
MBUS_LO DKC Bus Utilization
nl
BACKEND_SEQ_READ LDEV Backend
nl
BACKEND_NONSEQ_READ LDEV Backend
nl
BACKEND_WRITE LDEV Backend
nl
THP Pool Occupancy
nl
Snapshot Pool Occupancy
24 CLUI commands