HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

CFW_WRITE_CACHE LDEV IO type

DFW_COUNT LDEV IO type

DFW_NRML_COUNT LDEV IO type

DFW_SEQ_ACCESS LDEV IO type

DFW_WRITE_HITS LDEV IO type

DFW_SA_WRITE_HITS LDEV IO type

CACHEMODE_INHIBIT LDEV IO type

CACHEMODE_BYPASS LDEV IO type

PORT_IO_MAX Port Maximum IO/s

PORT_IO_MIN Port Minimum IO/s

PORT_IO_AVE Port Average IO/s

PORT_MB_MAX Port Maximum MB/s

PORT_MB_MIN Port Minimum MB/s

PORT_MB_AVE Port Average MB/s

FBUS_HI DKC Bus Utilization

FBUS_LO DKC Bus Utilization

MBUS_HI DKC Bus Utilization

MBUS_LO DKC Bus Utilization

BACKEND_SEQ_READ LDEV Backend

BACKEND_NONSEQ_READ LDEV Backend

BACKEND_WRITE LDEV Backend

THP_POOL_OCCUPANCY

SNAPSHOT_POOL_OCCUPANCY

Indicates that the command must list only configured alarms.–list

Specify the address of a management station in the format <http://

path.to.managementstation:<port>> or <https://

path.to.managementstation>.

–ms <management

station>

Specify a user name and password pair in the format user name:password.–auth <user:passwd>

Can be used in place of -auth.

NOTE: The password file must be created using only the encrypt command.

–pf <password file>

Specify the threshold level.–th <threshold>

Specify a csv list of email destinations.–email <Email List>

Specify a csv list of SNMP destinations.–snmp <SNMP List>

Indicates the alarm is enabled.–e

Specify the delimiter for delimited output. Used with -list and -details.–d<delim>

Displays data in a readable format. Used with -list and -details.–hr

Prints the usage statement.–?

CONFIGALARM 27