HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

NOTE: The following metrics are applicable to mainframe volumes only:

CFW_TOTAL LDEV IO type

CFW_READ LDEV IO type

CFW_READ_CACHE LDEV IO type

CFW_WRITE LDEV IO type

CFW_WRITE_CACHE LDEV IO type

DFW_COUNT LDEV IO type

DFW_NRML_COUNT LDEV IO type

DFW_SEQ_ACCESS LDEV IO type

DFW_WRITE_HITS LDEV IO type

DFW_SA_WRITE_HITS LDEV IO type

The P9000 Thin Provisioning (THP) Pool Occupancy, Snapshot Pool Occupancy, and Continuous

Access Journal metric category for an XP24000 array can be determined using the following

commands:

configalarm -dkc <array sn no> -mval <THP poolid> -metric

THP_POOL_OCCUPANCY

configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric SNAPSHOT_

POOL_OCCUPANCY

configalarm -dkc <array sn no> -mval <Snapshot poolid> -metric

JOURNAL_FILE_USAGE_UTIL

Examples

configalarm -list -hr

configalarm -list –L

configalarm -list

configalarm -dkc 10227 -mval 1 -metric THP_POOL_OCCUPANCY

configalarm -dkc 10227 -mval 0 -metric SNAPSHOT_POOL_OCCUPANCY

configalarm -dkc 10001 -mval 0 -metric JOURNAL_FILE_USAGE_UTIL -th 10

HOSTCFG

Syntax

hostcfg –op <op_string> -ha <HostAgent> [-auth <user:passwd>] [-ms

<URL>] [-L] [d<char>] [-hr] [-?]

Supported disk array types

XP and P9000 disk arrays

Description

Displays the configuration data of the host that is connected to the management station. It also

displays array related information. You can also use this command to remove unwanted hosts.

This command does not display HA version and the RMLIB details.

Switches

Required. Specify the task to be performed. Not necessary if -list is used.

–op <op_string>

xpinfo_req: indicates that the XPINFO data must be sent to the management station.

28 CLUI commands