HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —day
mm.dd.yyyy
Daily
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —h
mm.dd.yyyy hour
NOTE: The hour that you specify must be in a 24 hour format.
Hourly
where:
Indicates the month in which the RAID Group utilization is requested. This option must be used
with-a for retrieving the monthly overall RAID Group utilization values. Specify the month in
mm format and year in yyyy format.
-m
Indicates the week in which the RAID Group utilization is requested. This option must be used
with-a for retrieving the weekly overall RAID Group utilization values. Specify the week in
mm.dd.yyyy format. The day that you specify must correspond to a Sunday.
-w
Indicates the day on which the RAID Group utilization is requested. This option must be used
with-a for retrieving the daily overall RAID Group utilization values.
-day
Indicates the hour for which the RAID Group utilization is requested. This option must be used
with-a for retrieving the hourly overall RAID Group utilization values. Specify the date in
mm.dd.yyyy format, and the hour in 24 hours format.
-h
The Overall RAID Group Utilization Average is the average value (percent) of the set of utilization
samples returned for the requested time period (sum of sample values/number of samples).
The Overall RAID Group Utilization Maximum is the maximum value (percent) in the set of utilization
samples returned for the requested time period.
NOTE: Install Auto LUN P9000 and enable the monitor on the XP1024/XP128 arrays to make
the RAID Group Utilization metrics available on the arrays.
The following metrics are available:
LDEV_IO_TOTAL Total LDEV IOs/sec
nl
LDEV_IO_RAND_TOTAL - Total Random LDEV IOs/sec
nl
LDEV_IO_RAND_READ LDEV Random IO reads/sec
nl
LDEV_IO_RAND_READCACHE LDEV Random IO Reads/sec from cache
nl
LDEV_IO_RAND_WRITE LDEV Random IO writes/sec
nl
LDEV_IO_SEQ_TOTAL - LDEV Total Sequential Ldev IOs/sec
nl
LDEV_IO_SEQ_READ LDEV Sequential IO reads/sec
nl
LDEV_IO_SEQ_READCACHE LDEV Sequential IO reads/sec from cache
nl
LDEV_IO_SEQ_WRITE - LDEV Sequential IO writes/sec
nl
LDEV_IO_CFW_TOTAL - LDEV CFW total IOs/sec
nl
LDEV_IO_CFW_READ - LDEV CFW read IOs/sec
nl
LDEV_IO_CFW_READCACHE - LDEV CFW read IOs/sec from cache
nl
LDEV_IO_CFW_WRITE - LDEV CFW write IOs/sec
nl
LDEV_IO_CFW_WRITECACHE - LDEV CFW write IOs/sec from cache
nl
LDEV_IO_DFW_COUNT - LDEV DFW total IOs
nl
LDEV_IO_DFW_NRML_COUNT - LDEV DFW normalized IOs
nl
LDEV_IO_DFW_SEQ_ACCESS - LDEV DFW sequential access
nl
LDEV_IO_DFW_WRITE_HITS - LDEV DFW writes found in cache
nl
LDEV_IO_DFW_SA_WRITE_HITS - LDEV CFW sequential access writes found in cache
nl
LDEV_IO_CACHEMODE_INHIBIT - LDEV cachemode inhibit IOs
nl
LDEV_IO_CACHEMODE_BYPASS - LDEV cachemode bypass IOs
nl
LDEV_MB_TOTAL - LDEV total MB/sec
nl
LDEV_MB_RAND_TOTAL - LDEV total random MB/sec
nl
LDEV_MB_RAND_READ - LDEV random read MB/sec
nl
LDEV_MB_RAND_WRITE - LDEV random write MB/sec
nl
LDEV_MB_SEQ_TOTAL - LDEV sequential total MB/sec
nl
AGGREGATE 35