HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

Specify the management station ID or IP address. The default value for this entry is
localhost.
–ms <management
station>
Specify the configuration user name and password pair.
The default value for this entry is confmonxp:redstar.
–cauth <config
username:password>
In the interactive mode, pressing “Enter” for each entry retains the current or default values.
Example
proputility -i
THP
Syntax
thp -dkc <serial #> [-pid <thp pool id>] [-auth <user:passwd>] [-ms
<URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Supported disk array types
XP and P9000 disk arrays
Description
Enables you to obtain THP Pool occupancy metrics in percentage.
Switches
Required. Specify the array serial number.–dkc <serial #>
Specify the THP pool ID for which you want output displayed.–pid <thp pool id>
Specify the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.–auth <user:passwd>
Can be used in place of -auth.
NOTE: The password file must be created using the encrypt command only.
–pf <password file>
Specify the delimiter for delimited display.–d <char>
Displays readable output.–hr
Prints the usage statement.–?
NOTE: The -st and –et options are supported with the –pid option only. The array serial
number and –dkc are required elements.
Examples
thp -dkc <array sn no> -hr
thp -dkc 10090 -pid 1 -hr
SNAPSHOT
Syntax
snapshot -dkc <serial #> [-pid <snapshot pool id>] [-auth <user:passwd>]
[-ms <URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Supported disk array types
XP and P9000 disk arrays
Description
40 CLUI commands