Manualshelf

HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)

ManualsBrandsHP ManualsSoftwareHP StorageWorks Performance Advisor XP Media Kit
41424344454647484950
Specify the version.
The 010500 and 020000 versions are currently supported. The 010500 version is the default.
XP12000/XP10000 or later must use –dver 020000.
–dver <XXXXXX>
Enter 020000 to display the EXT-LUN information.
This creates the following output files:
nl
ldev_<filename>
nl
dkc_<filename>
nl
port_<filename>
nl
clpr_<filename>
Specify the option to display information.
read – for ldev read response time
nl
–resp <option>
write – for ldev write response time
nl
all – for ldev read and write response time
Can be used only with the –dver option.
The -dver must be 020000.
The option to display the RAID Group utilization.
The -dver must be 020000.
–rgutil
This option can be used with the resp option.
The option to display all the LDEVs that belong to a journal.–jnl
Prints the usage statement.–?
Examples
exportdb -dkc 10055 -st 09.14.2006 12:00:00 -et 09.14.2006 13:00:00
-dver 020000 -file test.csv -resp all
exportdb -st 09.16.2003 05:00:00 -et 09.16.2003 07:15:00 -file output.txt
-dkc 10033 -dver 020000 hr
Exporting data
To export data, complete the following steps:
1. Ensure that the CLUI is installed and set up as described in the CLUI installation documentation,
which is located in the Tools folder on the product DVD.
2. After the CLUI is installed, enter the following command at the command prompt in the working
directory:
nl
Exportdb st MM.DD.YYYY hh:mm:ss -et MM.DD.YYYY hh:mm:ss file
myfilename.txt -dkc <serial number>
where:
The command.Exportdb
The date and time to begin the export.–st
The last date and time to include in the export.–et
The full path to the file to which the data is to be exported.–file
The serial number of the specific disk controller from which you want to export data.–dkc <#>
The version number of the output type. This is an optional switch.
The current acceptable values for this switch are 010500, 010600, 016000, and 020000.
–dver <XXXXXX>
The default is 010500.
EXPORTDB 45