HP XP P9000 Performance Advisor Software v5.5 Command-line User Interface Reference Guide (T1789-96338, February 2013)
2007-04-05 01:34:00.109,10001,0,3,0,3,0,0,0,0,3,1288
2007-04-05 01:34:00.109,10001,0,3,0,3,0,0,0,0,3,1289
The following is the sample output for the exportdb command on an XP24000 array for Ports.
exportdb -hr -dkc 10090 -st 03.25.2011 00:00:00 -et 03.29.2011 11:08:00
-file a.xls -dver 020000
Disk Array Serial Number,Port ID,Date,Min IO/s,Max IO/s,Ave IO/s,Min MBs/s,
Max MBs/s,Ave MBs/s,Port Type,E-Seq list
10090,CL1A[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1A[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1A[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1B[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1B[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1B[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1C[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1C[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1C[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1D[Fibre(Ext-Lun Initiator)],2011-03-29 11:00:00.111,0.0,0.0,0.0,
0.0,0.0,0.0,Fibre(Ext-Lun Initiator),_
10090,CL1D[Fibre(Ext-Lun Initiator)],2011-03-29 11:00:00.111,0.0,0.0,0.0,
0.0,0.0,0.0,Fibre(Ext-Lun Initiator),_
10090,CL1D[Fibre(Ext-Lun Initiator)],2011-03-29 11:00:00.111,0.0,0.0,0.0,
0.0,0.0,0.0,Fibre(Ext-Lun Initiator),_
10090,CL1E[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1E[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1E[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1F[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
10090,CL1F[Fibre(Target)],2011-03-29 11:00:00.111,0.0,0.0,0.0,0.0,0.0,0.0,
Fibre(Target),-1
THP
For XP disk arrays
thp -dkc 10090 -hr -ms http://alpha138.rose.hp.com:80/ -auth administrator:administrator
Pool ID Occupancy(%)
0 99
1 78
11 100
12 0
125 54
13 58
14 0
15 0
16 28
18 100
2 32
4 15
5 100
50 100
51 3
76 100
8 97
9 99
thp -dkc 10090 -pid 0 -hr -ms http://alpha138.rose.hp.com:80/ -auth administrator:administrator
-hr > thp2.txt
Time Occupancy(%)
2010-09-07 17:39:01.203 99
2010-09-07 17:09:01.203 99
2010-09-07 16:39:01.203 99
2010-09-07 16:09:01.203 99
2010-09-07 15:39:01.203 99
2010-09-07 15:09:01.203 99
84 Sample outputs