HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

6. The script prompts you to enter the management station name or IP Address.
• If you want to retain the default value, which is http:\\<localhost>, press Enter and
proceed to the next step. In addition, port 80 will be the default port used to establish
communication with the management station.
• If you entered the management station name or IP address, the installation script prompts
you for the following additional values:
a. To confirm if SSL is installed and configured on the management station's web server.
Enter n to continue without SSL.
b. To enter the port number of the management station.
Enter the same port number that HP XP P9000 Performance Advisor on the
management station is configured to use.
If you want to use the default port 80, press Enter.
Proceed to the next step.
7. The script prompts for your user name and password.
• If you are a valid user on the local system where P9000 Performance Advisor is installed
or on the domain controller, use your local system or domain login credentials for
authentication.
NOTE: It is mandatory to provide a valid user name and password for all the CLUI
commands to function properly. Valid user account implies one of the following:
◦ The local system administrator has added your name to the HP Storage Admin
or HP Storage Users group on the system where P9000 Performance Advisor
is installed.
◦ The domain/site administrator has added your name to the group (global group)
that is given administrator privileges or to the group (global group) that is given
user-level privileges.
IMPORTANT: If you specify only the user name and not your domain name, P9000
Performance Advisor will assume that you are a local system user or you belong to the
same domain as that of the management station.
• If you have a user account created in the HP XP P9000 Performance Advisor user super
user database, use your HP XP P9000 Performance Advisor login credentials for
authentication.
8. After installation, export the default installation directory path using the following command:
export PATH=$PATH:/opt/xppa/clui
This completes installing CLUI and makes all installed libraries available in the file system.
For Windows:
12 Installing CLUI