HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

Specify the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the form user name:password.–auth <user:pass>
Specify the labeled and the delimited output data.–L
Displays data in a readable format.–hr
The output average and maximum values for the returned samples.–a
Specify the delimiter for the delimited output.–d<delim>
Prints all of the supported metrics.–display
Prints the usage statement.–?
For a RAIDGRP_UTIL_OVRALL metric, if you want to view the average and maximum values on a
monthly, weekly, daily, or hourly basis, following are the options that can be used with -a in the
Aggregate command (instead of the -st and -et options):
NOTE: The options listed in the following table can be used with -a only for
RAIDGRP_UTIL_OVRALL metrics.
SyntaxCommand
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —m yyyy
mm
Monthly
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —w
mm.dd.yyyy
NOTE: Irrespective of the month and year, the day that you specify must correspond to a
Sunday.
Weekly
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —day
mm.dd.yyyy
Daily
aggregate -a -items RAIDGRP_UTIL_OVRALL:<DKC>:<RAID_GROUP> —h
mm.dd.yyyy hour
NOTE: The hour that you specify must be in a 24 hour format.
Hourly
where:
Indicates the month in which the RAID Group utilization is requested. This option must be used
with-a for retrieving the monthly overall RAID Group utilization values. Specify the month in
mm format and year in yyyy format.
-m
Indicates the week in which the RAID Group utilization is requested. This option must be used
with-a for retrieving the weekly overall RAID Group utilization values. Specify the week in
mm.dd.yyyy format. The day that you specify must correspond to a Sunday.
-w
Indicates the day on which the RAID Group utilization is requested. This option must be used
with-a for retrieving the daily overall RAID Group utilization values.
-day
Indicates the hour for which the RAID Group utilization is requested. This option must be used
with-a for retrieving the hourly overall RAID Group utilization values. Specify the date in
mm.dd.yyyy format, and the hour in 24 hours format.
-h
NOTE: The -a
The Overall RAID Group Utilization Average is the average value (percent) of the set of utilization
samples returned for the requested time period (sum of sample values/number of samples).
The Overall RAID Group Utilization Maximum is the maximum value (percent) in the set of utilization
samples returned for the requested time period.
AGGREGATE 33