HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

Smart pool data not available. Please check the array configuration.
ThP or Pool id of the smart pool for which you want to view
the occupancy and capacity performance values. The
POOL ID
minimum and maximum values are the minimum and
maximum pools supported by an array.
Total occupancy of the ThP or smart pool. The value
displayed is between 0 to 100.
OCCUPANCY
Actual configured capacity of the ThP or smart pool. The
value is displayed in MBs.
ACT_CAP
Total capacity of all ThP volumes in the ThP or Smart pool.
The value is displayed in MBs.
MAN_CAP
Capacity used by the ThP or smart pool. The value is
displayed in MBs.
USED_CAP
Free capacity of the ThP or smart pool. The value is
displayed in MBs.
FREE_CAP
TOP20UTIL
For P9000 disk arrays
top20util -hr -dkc 53012 -mp 1
++++++++++++++++++++++++++++++++++++++++++++++++++
Owner Processing Type BusyTime
LDEV:0:13 Open-target 0.020880299
++++++++++++++++++++++++++++++++++++++++++++++++++
LDEV:0:0C Open-target 0.019729873
++++++++++++++++++++++++++++++++++++++++++++++++++
LDEV:0:07 Open-target 0.005565483
++++++++++++++++++++++++++++++++++++++++++++++++++
LDEV:0:02 Backend 8.6418947E-4
++++++++++++++++++++++++++++++++++++++++++++++++++
top20util -hr -dkc 53012 -mp 1 -st 07.19.2010 09:00:00 -et 08.02.2010 09:00:00
++++++++++++++++++++++++++++++++++++++++++++++++++
Owner Processing Type BusyTime
LDEV:0:13 Open-target 0.020880299
++++++++++++++++++++++++++++++++++++++++++++++++++
LDEV:0:0C Open-target 0.019729873
++++++++++++++++++++++++++++++++++++++++++++++++++
LDEV:0:07 Open-target 0.005565483
++++++++++++++++++++++++++++++++++++++++++++++++++
LDEV:0:02 Backend 8.6418947E-4
++++++++++++++++++++++++++++++++++++++++++++++++++
TOP20UTIL 87