HP XP P9000Info Release Notes HP Part Number: T1789-96357 Published: March 2014 Edition: 1
© Copyright 2014 Hewlett-Packard Development Company, L.P.
Contents 1 HP XP P9000Info Release Notes...................................................................4 Description..............................................................................................................................4 Supported platforms..................................................................................................................4 Firmware requirements............................................................................................................
1 HP XP P9000Info Release Notes Version: 27.00.00 Description HP XP P9000Info is a command-line utility provided with the HP XP P9000 Performance Advisor Software and Array Manager Software. It is used to obtain the configuration information of the logical unit numbers (LUNs) exposed to the XP or the P9000 disk arrays. This document describes the HP XP P9000Info 27.00.00 enhancements, fixes, limitations, and other additional information. IMPORTANT: HP XP P9000Info was called XPInfo in v19.01.
• ESXi 5.0 • ESXi 5.1 NOTE: Multipathing is enabled. Firmware requirements Table 1 (page 5) lists the minimum firmware requirements. Table 1 Firmware requirements XP and P9000 disk arrays Minimum firmware version XP24000 60-04-13-00/00 to 60-08-37-00/00 XP20000 60-02-48-00/12 to 60-08-37-00/00 SVS200 50.07.69.00/00 or later XP10000/XP12000 50.09.34.00/00 or later P9500 70-05-02-00/00 to 70-06-13-00/00 P9000/XP RAID Manager Library (RMLIB) (P9000, XP24000, XP12000, XP10000, and SVS200) 1.
Fixes HP XP P9000Info v27.00.00 includes the following fixes: • If there are non-XP devices on the same host (Solaris), then HP XP P9000Info does not display all XP devices. • HP XP P9000Info does not display any value for the SLPR parameter. This is applicable only for P9500 disk arrays. • HP XP P9000Info can now recognize RAID 6 (14D+2P) disk mechanism configured on the array. • HP XP P9000Info also supports the following operating systems: Notes ◦ IBM AIX 7.
3. 4. 5. 6. 7. 8. From the list of XP and P9000 disk arrays that are monitored by P9000 Perf Advisor, click the + sign for the XP and the P9000 disk array, for which you want to view the related SLPR and CLPR data. Select LDEV from the list displayed. On the Array View LDEV screen, select the Column Settings check box. In the LDEV Column Settings list, select the check box for SLPR and CLPR.