HP XP7 PA Software Installation Guide

1. Enter the required server connection values. “RADIUS server connection settings” (page 56)
provides the description for each of the RADIUS fields.
NOTE: Among the following settings, only the server address and shared secret values must
be provided. The remaining values are pre-populated and should not be modified.
Figure 13 Configure RADIUS Authentication Settings installation window
Table 10 RADIUS server connection settings
DescriptionScreen elements
The network name or IP address of the RADIUS server
that will be used for authentication.
Server Address box
The port number to use for RADIUS authentication.
(Default value: 1812).
Port box
Choice of the method (CHAP or PAP) to use for RADIUS
authentication. (Default authentication method: PAP).
Authentication Method list
The shared secret to be used when communicating with
the RADIUS server for user authentication.
Shared Secret box
Confirm the shared secret to be used when
communicating with the RADIUS server for user
authentication.
Confirm Shared Secret box
The maximum number of authentication attempts for a
user to log in (default value: 3).
Retry Count box
The duration of time (in milliseconds) before timing out
on an authentication attempt. (Default value: 3000).
Timeout Value box
2. Click Next to proceed. The Choose Setup Type installation window appears. For more
information on the next set of steps, see “Selecting complete or custom installation method”
(page 57).
56 Installing HP XP7 Performance Advisor