HP XP7 PA Software Installation Guide

• Additional PA LTU that you purchased
• Internal raw disk capacity or usable capacity that the LTU supports
IMPORTANT:
• The internal raw disk capacity is applicable only for the XP disk arrays. It refers to the
total capacity of all the RAID groups created on your XP disk array and excludes the disk
capacity occupied by the external RAID groups and pool volumes, such as the ThP pools
and the VVols.
• The usable capacity is applicable only for the P9500 disk arrays and is calculated as
the sum of the following:
Total allocated LDEV capacity + total unallocated LDEV capacity + reserved capacity
The usable capacity includes the following:
◦ Allocated internal LDEVs (total allocated LDEV capacity)
◦ Unallocated internal LDEVs (total unallocated LDEV capacity)
◦ Pool volumes, such as ThP, snapshot, and journal volumes (reserved capacity)
Usable capacity = Internal LDEVs — (External Volumes + Virtual Volumes)
5. Provide the following details on the Array information input screen:
• Enter the Array DKC serial number, which is a 5 digit number, such as 10900, 53036.
• Select the Hardware platform from the list.
The supported XP7 disk array, P9000 disk array model P9500 and the XP disk array
models, such as the XP24000, XP20000, XP12000, XP10000, XP1024, and the XP128
are displayed for selection.
6. Click Next >>.
The Requestor Information screen appears.
7. Provide the requestor and the company related information, and click Next >>.
The Requestor Information screen appears again with all the details that you provided.
8. Click Next >> to confirm the details.
The Certificate screen appears and provides the license details. You can do the following on
the Certificate screen:
• Click Save to print a copy of the certificate.
• Click Keyfile to save the license file as a .dat file on your system.
• Click Email to send a copy of the license certificate and the key file to the intended
recipient.
66 Installing HP XP7 Performance Advisor