P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.3 (T1789-96325, August 2011)

NOTE:
For the –f option, do not specify the file extension in the command prompt window.
It is mandatory to specify either the —hrs or —min option. You can also specify both the options.
Menus
P9000Watch enables you to monitor and customize performance data of ports, RAID groups, LDEVs,
and host groups through different menus. They are:
• Array menu
• Host Groups
• Nickname menu
• Port menu
• Pick LDEVs/RAID Groups selection scheme
• RAID Group menu
• LDEV menu
• Settings menu
Array menu
The Array menu appears after you start P9000Watch. This menu lists all the XP and the P9000 disk
arrays that are connected to the host.
The Array menu also displays the P9000Watch version. You can also view the P9000Watch version
using the following command in the command prompt:
XPWatch.exe -v
To select an array, enter the number (Num) corresponding to it. For example, to select a P9000 disk
array that belongs to the P9500 disk array model, enter 3.
NOTE:
You can select only one array at a time.
Figure 6 shows the Array menu.
Working with P9000Watch menus and commands24