P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.3 (T1789-96325, August 2011)

Selecting Host Groups
Select the host whose performance data you want to monitor.
To select a host group, enter the number corresponding to it. For example, to select HWP10 and
Kalam host groups (see figure Available Host Groups), perform the following steps:
1. Enter 111 and press the Enter key.
The HWP10 host group is selected as shown in the following figure.
NOTE:
The selected host group is highlighted in green.
Figure 8 shows one host group selected from the list of available host groups.
Figure 8 Available Host Groups: One Host Group selected
.
2. Enter 118 and press the Enter key.
The Kalam host group is selected.
Figure 9 shows two host groups selected from the list of available host groups.
P9000Watch and P9000Sketch Reference Guide 27