P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.3 (T1789-96325, August 2011)

2. Select the array whose performance you want to monitor and press the Enter key.
3. The Available Host Groups screen displaying the list of host groups connected to the array ap-
pears.
4. Select the required host and enter the c command. The Port menu showing all ports connected
to the hosts appears.
5. Select the required port and enter the c command. The Pick LDEVs/RAID Groups Selection Scheme
screen appears.
RAID Group menu
The RAID Group menu lists the details of all RAID groups connected to the selected host(s).
Figure 17 shows the RAID Group menu.
Figure 17 RAID Group menu
.
Table 10 describes the fields that appear in the RAID Group menu.
Table 10 RAID Group menu — screen fields
DescriptionScreen field
Selection numberNum
The Rg column displays the Parent RAID group if the
RAID groups are “Concatenated”
Rg
RAID levelLevel
RAID typeType
Drive type of Hard Disk Drives constituting the RAID
group
HDD
Speed of the Hard Disk Drives (HDD) in rpmRpm
Total number of LDEVs belonging to the RAID groupLDEV#
Total number of CHA ports associated with the RAID
group
Cp#
Total number of host groups associated with the RAID
group
Hg#
Working with P9000Watch menus and commands36