P9000Watch and P9000Sketch Reference guide for HP StorageWorks P9000 Performance Advisor v5.3 (T1789-96325, August 2011)

DescriptionScreen field
CU: LDEV numberLDEV
RAID groupRG
Emulation typeEmulation
SLPR number
NOTE:
Slpr does not exist in the P9000 disk arrays. So,
the Slpr field displays N/A for the P9000 disk
array in the output screen of the LDEV menu.
Slpr
Cache Logical Partition (CLPR) numberClpr
DKA or ACP associated with the LDEVDKA
LUSE positionLuseP
Number of ports mapped to LDEVMap#
Viewing LDEV menu
This screen appears when you select the Filter RAID Groups by LDEVs option from the Viewing Pick
LDEVs/RAID Groups Selection Scheme.
Settings menu
The Settings menu enables you to modify the settings.
This menu includes:
• Menu settings
• Performance data collection settings
Figure 19 shows the Settings menu.
Working with P9000Watch menus and commands38