HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

LO
Chapter 5: Configuring Outlook or Lotus Notes Configuring your system for Exchange and Outlook
5-12 HP StorageWorks Reference Information Storage System Administrator Guide, February 2005
To properly install the plug-in for users other than the administrator who
installs it, make the following settings in HKLM:
• [HKLM\Software\Microsoft\Office\Outlook\Addins\
PTOutlookArchive.Connect]
– FriendlyName=Hewlett-Packard Outlook Add-in
– Description=Hewlett-Packard Outlook Add-in
– LoadBehavior=dword:00000003
– CommandLineSafe=dword:00000000
Installing and configuring the Outlook plug-in for users
1. On the user’s computer, close Outlook if open, and install the HP RISS
Outlook plug-in by running
setup.exe on the Utilities CD.
2. Follow the Install Shield wizard instructions.
3. Open Outlook. The
Search Archive button is displayed in Outlook.
4. Select
Tools > Options . The Options dialog box appears.
5. Click
Archive Options . The Archive Options panel appears.
6. In the
URL to Modify (Fetch URL) list, select the default URL to display it in
the
URL to Modify box, and edit the URL. Replace HOST with the DNS
name associated with the virtual IP (VIP) web user interface for the
system.
7. In the
Search URL box, enter the internet address of RISS. Replace HOST
with the DNS name associated with the VIP web user interface for the
system.
8. Click
OK .
9. In Outlook, click
Search Archive . A browser window with the logon page
for the Web Interface appears. If it does not, the DNS names specified
previously in the Archive Options panel are incorrect.