HP StorageWorks Reference Information Storage System V1.1 Administrator Guide (February 2005)

Nagios folder Chapter 2: Platform Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, February 2005 2-71
Nagios Stats view
This view provides information about service monitoring performance. The
gray-box heading for this view is
Performance Information .
Table 2-52: Process commands, Nagios Info view
Command link Description
Shutdown the Nagios process Shuts down Nagios process.
Note: After Nagios is shut down, it cannot be
restarted via the web interface.
Restart the Nagios process Restarts Nagios process. This is equivalent to
sending the process a HUP signal. All
information is flushed from memory,
configuration files are reread, and Nagios starts
monitoring with new configuration information.
Enable automatic email notifications
for important system events
Enables host and service notifications on
program-wide basis.
Stop executing service checks Temporarily stops execution of service checks,
and prevents notifications from being sent (for
all services and hosts). Service checks are not
executed again until you issue a command to
resume service check execution.
Stop accepting passive service
checks
Stops acceptance of passive service check
results found in external command file. All
passive check results found are ignored.
Disable event handlers Temporarily stops host or service event
handlers.
Start obsessing over services Tells Nagios to start obsessing over service
checks. Read the documentation on distributed
monitoring for more information.
Enable flap detection Enables flap detection for hosts and services on
program-wide basis. Individual hosts and
services might have flap detection disabled.
Disable failure prediction Disables failure prediction for hosts and services
on program-wide basis.
Disable performance data Disables processing of performance data for
hosts and services on program-wide basis.