HP P6000 Replication Solutions Manager CLI Reference (T3680-96071, June 2012)

Specifies the password for the user name to authenticate the given remote replication
manager server.
password
Specifies the path for the export operation with an optional file name, or the full file
path for import.
path
Specifies the user name to authenticate the given remote replication manager server.username
SET SYSTEM
The SET SYSTEM command displays the properties of the storage array.
Syntax
set sys[tem] <system name>
{ [refresh]
[refresh_all]
[dr_protocol={hpca|scsifc|either}]}
Switches
Refreshes the data for the array. If the name is omitted, the selected array is refreshed.refresh
Specifies the DR protocol. Options are:dr_protocol
• hpca (HP FC Data Replication Protocol)
• scsifc (HP SCSI FC Compliant Data Replication Protocol)
• either (The firmware determines which protocol to use based on the mode
supported by the peer controller.
Refreshes all array data on the replication server.refresh_all
Specifies the name of the array.system name
SET VDISK
The SET VDISK command changes the presentation of a virtual disk, or synchronizes a virtual
disk with another virtual disk. Select an array before using this command.
Syntax
set vd[isk] <vdisk name>
[capacity_requested|cr<value (in gb)>]
[cache_m[ode]|cm={write_t[hrough]|wt|write_b[ack]|wb}]
[change_into_container]
[refresh]
[ {add_p[resentation]|ap=<host name>}
[lun=<lun number>]
|
[remove_p[resentation]|rp=<host name>
[type={host_fc_port|host_iscsi}]
[over_commit|oc={yes|no}] ]
|
[ [inst[ant_restore_from]|instrest|irestore=<disk name>]]
|
[ {migrate_vraid_level|mvrl={raid0|raid1|raid5|raid6}}
[keep={true|false}]]
|
34 CLUI commands