HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)

Examples
SetDrGroupFailsafe ( "\\ArrayA2\DrGrpPets", ENABLED )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see Command result values.
• OS specifics. None.
• Guidelines apply. See the HP P6000 Replication Solutions Manager User Guide for remote
replication guidelines.
• See also job command SetDrGroupFailsafeOnLinkDownPowerUp.
• See Resource names and UNC formats.
SetDrGroupFailsafeOnLinkDownPowerUp
Specifies whether or not virtual disks in a source DR group are automatically re-presented to hosts
after a power-up (reboot) of the source storage system when the link to the destination DR group
is down.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetDrGroupFailsafeOnLinkdownPowerUp( %drgroup_unc_name%, DISABLED )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
be changed.
Failsafe On Link-down/Power-up. Select or enter the mode. Choices are enabled and disabled.
Examples
SetDrGroupFailsafeOnLinkdownPowerUp ( "\\ArrayA2\DrGrpPets", DISABLED )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see Command result values.
• OS specifics. None.
• Guidelines apply. See the HP P6000 Replication Solutions Manager User Guide for remote
replication guidelines.
• See also job command SetDrGroupFailsafe.
• When a job is run, some job arguments may specify features that are not available on the
target array.
• See Resource names and UNC formats.
Job commands 155