HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)

Messages:
Job state: executed a Pause() step.
Job instance has been paused.job_paused
Job state: paused due to error or user
action.
Job instance has started.job_started
A start message is issued when a job
instance is initially started. No message is
sent when a paused instance is continued.
No message is sent when a job instance is
aborted
Job instance has started. Also when its
status changes to any non-executing state,
such as completed, failed, and paused.
job_started_or_stopped
Noneno_notification
Examples
SetNotificationPolicy ( "[e-mail]", "[e-mail]", JOB_STARTED_OR_STOPPED )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. None.
• Command result value. None. For a complete list, see Command result values.
• OS specifics. None.
• An e-mail server is required.
• The e-mail message is sent only if the specified condition occurs. Compare with SendEmail.
SetPreferredPortConfiguration
Configure host port priorities for HP P6000 Continuous Access remote replication tunnels.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SetPreferredPortConfiguration ( %local_storsys_wwn%, %remote_storsys_wwn%, CONTROLLER_A, CONTROLLER_A,
HOSTPORT_1, PREFPORT_PRIORITY_1, TRUE, 10 )
Local Storage System WWN (%local_storsys_wwn%). Select or enter the WWN of the local storage
system on which the ports are being configured.
Remote Storage System WWN (%remote_storsys_wwn%). Select or enter the WWN of the remote
storage system to which the host ports are connected.
Local Controller. Select or enter the local controller (A or B) for which ports are being configured.
Remote Controller. Select or enter the remote controller (A or B).
Local Host Port. Select or enter the local host port being configured.
Local Host Port Priority. Select the priority for the host port.
Enable DR Port Checking. Enable (TRUE) or disable (FALSE) port checking.
Port Checking Interval. Set the interval (in minutes) at which the storage system checks for changes
in the host port settings. If the settings for a remote node have been modified, the new settings will
be implemented upon expiration of the check interval.
164 Job Commands