HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)

RAID Level. Select the storage redundancy level for the copies. Choices are RAID0, RAID1, RAID5,
RAID6, and same. See virtual disks redundancy level.
Wait for Discovery Select wait or nowait. See Wait/nowait argument.
Examples
These examples show host volume mount points. Device names can also be used.
SnapcloneHostVolumeGroup ( "\\HostA2\/home/cats_vg", SAME, WAIT )AIX
SnapcloneHostVolumeGroup ( "\\HostA2\/users/cats_vg", SAME, WAIT )HP-UX
SnapcloneHostVolumeGroup ( "\\HostA2\/var/cats_vg", SAME, WAIT )Linux
Not applicableOpenVMS
SnapcloneHostVolumeGroup ( "\\HostA2\/usr/cats_vg", SAME, WAIT )Solaris
SnapcloneHostVolumeGroup ( "\\HostA2\dom01", SAME, WAIT )Tru64 UNIX
Not applicableWindows
Comments
• Associated validation commands. ValidateSnapcloneHostVolumeGroup.
• Agent and license prerequisites. Requires a host agent. Requires a local replication license
for the storage system on which the underlying storage volume (presented source) is located.
• OS specifics. Yes. See examples.
OpenVMS. OpenVMS does not support volume groups. This command is not applicable to
OpenVMS volume sets.
Tru64 UNIX. Replication is not supported when an AdvFS domain spans partitions.
Tru64 UNIX. When this command is used with AdvFS volumes that have heavy I/O, HP recommends
briefly suspending the I/O before the replication step. See Suspending I/O before replicating
AdvFS volumes.
Windows. Windows does not support volume groups.
• See Resource names and UNC formats.
SnapcloneHostVolumeGroupToContainersInManagedSet
Creates preallocated snapclones (point-in-time copies) of the storage volumes (virtual disks) that
underlie a host volume group, by using containers in a managed set. The snapclone copies are
presented to the enabled host and a host bus scan is performed to identify the presented storage.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
SnapcloneHostVolumeGroupToContainersInManagedSet ( %volgroup_unc_name%, %managed_set_of_containers%,
NOWAIT )
UNC Host Volume Group Name (%volgroup_unc_name%). Select or enter the UNC name of the
host volume group to copy.
Managed Set Name (%managed_set_of_containers%). Select or enter the name of the managed
set in which the virtual disk containers are members.
Wait Flag. Select WAIT or NOWAIT. See Wait/nowait argument.
Job commands 171