HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)

Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
Wait ( "0:0:10" )
Timespan. Enter the amount of time to wait. The format is hours:minutes:seconds (hh:mm:ss)
Examples
Wait ( "1:15:0" ) – Halts the job for a period of 1 hour, 15 minutes, and 0 seconds.
Comments
• Associated validation commands. None.
• Agent and license prerequisites. None.
• Command result value. None. For a complete list, see Command result values.
• OS specifics. None.
WaitDrGroupNormalization
Halts a job until all of the storage volumes (virtual disks) in a DR group are normalized (unshared).
When all of the volumes are normalized, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitDrGroupNormalization ( %drgroup_unc_name% )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the name of the DR group to check
for normalization.
Examples
WaitDrGroupNormalization ( "\\ArrayA2\DrGrpPets" )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see Command result values.
• OS specifics. None.
• The storage volumes in the DR group are checked at regular intervals. When all volumes are
normal or unshared, the job proceeds to the next step. While any volume in the DR group is
normalizing or unsharing, the job continues to check.
• See Resource names and UNC formats.
WaitDrGroupSynchronizationTransition
Halts a job until the I/O mode of a DR group changes. When the I/O mode changes, the job
proceeds to the next step.
202 Job Commands