HP P6000 Replication Solutions Manager Job Command Reference (T3680-96090, October 2012)

Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitDrGroupSynchronizationTransition ( %drgroup_unc_name% )
UNC DR Group Name (%drgroup_unc_name%). Select or enter the UNC name of the DR group to
check for an I/O mode (synchronization) change.
Examples
WaitDrGroupSynchronizationTransition ( "\\ArrayA2\DrGrpPets" )
Comments
• Associated validation commands. None.
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. None. For a complete list, see Command result values.
• OS specifics. None.
• See also SetDrGroupIoMode command.
• See Resource names and UNC formats.
WaitForHostDiskDeviceWriteCacheFlush
Halts a job until the write cache has been flushed for the storage volume (virtual disk) that underlies
a host disk device. When the write cache has been flushed, the job proceeds to the next step.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
WaitForHostDiskDeviceWriteCacheFlush ( %hoststorvol_unc_name% )
UNC Host Disk Device Name (%hoststorvol_unc_name%). Select or enter the UNC name of the host
disk device to check for completion of a write-cache flush.
Examples
WaitForHostDiskDeviceWriteCacheFlush ( “\\HostA2\/dev/dsk/hd1” )AIX
WaitForHostDiskDeviceWriteCacheFlush ( “\\HostA2\/dev/dsk/c2t0d2” )HP-UX
WaitForHostDiskDeviceWriteCacheFlush ( “\\HostA2\/dev/sda3” )Linux
WaitForHostDiskDeviceWriteCacheFlush ( “\\HostA2\$1$DGA2:” )OpenVMS
WaitForHostDiskDeviceWriteCacheFlush ( “\\HostA2\/dev/dsk/c0t5d0s6” )Solaris
WaitForHostDiskDeviceWriteCacheFlush ( “\\HostA2\/dev/disk/dsk100c” )Tru64 UNIX
WaitForHostDiskDeviceWriteCacheFlush ( “\HostA2\Disk3” )Windows
Comments
• Associated validation commands. ValidateHost.
• Agent and license prerequisites. Requires a host agent.
• Command result value. None. For a complete list, see Command result values.
Job commands 203