HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

LO
Chapter 2: Persist Control Center PCC Views, Detailed Descriptions
2-92 HP StorageWorks Reference Information Storage System Administrator Guide, April 2004
Table 2-91: SmartCell Cloning View Features
Feature Description
Cloning Set up Lists any smart cells whose mirrors are not viable and
shows you how many free cells are available.
• Source – The IP address of a smart cell without a viable
mirror. If all smart cells have viable mirrors, the view
displays “No Broken Groups Found.” If more than one
smart cell needs a mirror, a Change Source button is
present below the automatically selected IP address.
• Free Cells – The number of smart cells that are currently
in the FREE state. This is decremented by one after a
cloning operation starts.
Click the Change Source button, when present, to select a
different smart cell for cloning. When the selection box
appears, select the desired smart cell from the pull-down
list and click the Select button.
Clone Cell Click the Clone Cell button to start cloning the selected
source. This button is unavailable if there are no smart
cells to clone.
Status Area Shows the following information about an ongoing cloning
operation:
• Source selected – The IP address of the smart cell that is
being duplicated
• Target selected – The IP address of the smart cell that is
receiving the duplicate data
• Current Step Percentage – A dynamic bar showing how
much of the source data has been duplicated
• Overall Percentage – The current step in the cloning
operation. The steps are Initializing, Assigning target
host, Transferring data, Transferring indexes, Waiting
for indexer to complete, Updating history log, and
Completed or Failed. Some steps happen so quickly that
you may not see them. Steps such as Transferring data
and Transferring indexes can take a long time if there is
much data to clone.
The check icon ( ) indicates that the cloning operation
is proceeding normally. If the operation fails, an X icon
( ) is displayed.