HP StorageWorks Reference Information Storage System V1.0 Administrator Guide (May 2004)

PCC Views, Detailed Descriptions Chapter 2: Persist Control Center
HP StorageWorks Reference Information Storage System Administrator Guide, April 2004 2-97
Check
Command
The command used to check this service.
Click the link to display the command definition – see
View Config
View Features, Commands
, page 2-99.
Check Period Name of the defined checking period: always. The always value means
the service can be checked at any time.
Click the link to display the definition of the always period – see
View
Config View Features,
Time Periods, page 2-99.
Enable Active
Checks
Whether or not active service checks are currently enabled.
Default
Contact
Groups
Contact groups defined for the service: allAdmins is the only contact
group used by the PCC.
Click a contact group link to display the definition of the contact
group – see
View Config View Features, Contact Groups , page 2-99.
Enable
Notifications
Whether or not notifications are currently enabled for this service.
Notification
Interval
This is always No Renotification, meaning only one notification is sent
when a service is detected as having a problem (see next).
Notification
Options
The service status values that can cause a notification to be sent:
CRITICAL and RECOVERY, where RECOVERY represents a transition
from a CRITICAL status value to the normal status value (OK).
Notification
Period
Name of the defined notification period: always. The always value
means notifications can be sent at any time; they are sent
immediately.
Click the link to display the definition of the always period – see
View
Config View Features,
Time Periods, page 2-99.
Retention
Options
The types of information that are retained in the retention file,
/usr/
local/nagios/var/status.sav
: all types of information.
(
Not used by PCC: Parallelize, Volatile, Obsess Over, Enable Passive Checks, Check
Freshness, Freshness Threshold, Event Handler, Enable Event Handler, Stalking Options,
Enable Flap Detection, Low Flap Threshold, High Flap Threshold, Process Performance Data,
Enable Failure Prediction, and Failure Prediction Options.)
Table 2-96: View Config View Features, Services (Continued)
Feature Description